51300C Water Filter With Chip For Elkay ezH2O EWF3000 Bottle Fill Stations

About This

• 1. Built‑in RFID Chip & Compatibility: Fits Elkay ezH2O filling stations LZS8WSLP, LZS8WSSP, LZSTL8WSLP, LZSTL8WSSP. Also compatible with Halsey Taylor HydroBoost and EWF3000 systems. Each filter comes with integrated RFID chip. No need to remove or transfer chips from old cartridges, helps resolve dispenser chip‑related alerts for normal machine operation.
• 3. Multi-Stage Efficient Filtration for Better TasteAdopts multi-layer structure with polypropylene pre-filter mesh and dense carbon block. The non-woven fabric traps coarse sediment and large particles, while microporous carbon blocks absorb contaminants. Upgrade your tap water and bring a refreshing drinking experience for staff, students and visitors.
• 4. Long Service Life & Economical for Heavy UseEach filter delivers up to 3,000 gallons of purified water or 12 months of service (whichever comes first, affected by local water quality). Stable filtration performance cuts frequent replacements, perfectly matching high water demand in busy public venues and lowering long-term operational costs.
• 5. Tool-Free Quick Installation & User-Friendly DesignComes with a convenient 1/4-turn quick-disconnect interface. No tools required for fast filter replacement. You can finish swapping within minutes following dispenser reset procedures. Simple operation reduces maintenance difficulty for facility managers.

Overview

• Material : Plastic
• External Testing Certification : NSF, ANSI
• Product Benefits : Reduces Chlorine
• Does this filter work for all Elkay ezH2O water bottle fillers?
• This 51300C filter with RFID chip only works for P‑suffix enhanced models with RFID chip detection. It cannot replace 51600C or 71300C filters.
• Can I use this RFID‑chipped filter on K‑suffix dispensers?
• Physically it fits, and water filtration still works. However, K‑suffix units lack the RFID reader hardware. The filter‑replacement alert will not reset. This filter is designed only for P‑suffix RFID‑enabled models.
• Why does the filter warning light stay red after installation?
• Most likely caused by incorrect installation direction.The side with red sticker must face the machine circuit board. Fully twist and lock the filter to ensure stable RFID recognition.
• Why is the water black after installing the new filter? Is the filter defective?
• Fine carbon dust inside new filters is normal.Run continuous water for 5–10 minutes until the water becomes clear before drinking. Check the O-ring seal and tight installation to avoid water leakage.
• 51300C Filter With Two Chip
• Does this filter work for all Elkay ezH2O water bottle fillers? This 51300C filter with RFID chip only works for P‑suffix enhanced models with RFID chip detection. It cannot replace 51600C or 71300C filters.
• Can I use this RFID‑chipped filter on K‑suffix dispensers? Physically it fits, and water filtration still works. However, K‑suffix units lack the RFID reader hardware. The filter‑replacement alert will not reset. This filter is designed only for P‑suffix RFID‑enabled models.
• Why does the filter warning light stay red after installation? Most likely caused by incorrect installation direction.The side with red sticker must face the machine circuit board. Fully twist and lock the filter to ensure stable RFID recognition.
• Why is the water black after installing the new filter? Is the filter defective? Fine carbon dust inside new filters is normal.Run continuous water for 5–10 minutes until the water becomes clear before drinking. Check the O-ring seal and tight installation to avoid water leakage.
• Previous page
• 1 Scene Selection
• Scene Selection
• 2 Installation Way
• Installation Way